Introduction to OCCT: OCCT is a renowned testing program for evaluating your computer's stability, including CPU, GPU, power supply, and memory. It helps uncover overheating, unstable voltages, and hardware issues.
Installing OCCT: Start by downloading OCCT from the official website (https://www.ocbase.com/) and follow the installation instructions.
Interface and Tabs: Once OCCT is installed, open the program and explore its tabs:
- CPU: OCCT (Linpack): Assess CPU stability and temperature.
- CPU: OCCT: Test CPU performance and power supply stability.
- GPU: 3D: Evaluate GPU stability and temperature.
- GPU: Memtest: Test GPU memory stability.
- Power: Evaluate power supply stability.
- Memory (RAM): Memtest: Test system memory stability.
Performing a CPU Stability Test:
- Select your desired CPU test tab.
- Adjust the test duration (recommended 1-2 hours).
- Enable "AVX-compatible Linpack" if suitable.
- Click "Start" to initiate the test. Monitor temperature and voltage.
Performing a GPU Stability Test:
- Choose the "GPU: 3D" tab.
- Set the test duration and resolution.
- Click "Start" to initiate the test. Monitor temperature and voltage.
Performing a GPU Memory Test:
- Select the "GPU: Memtest" tab.
- Set the test duration and memory load.
- Click "Start" to initiate the test. Watch for errors and warnings.
Performing a Power Supply Test:
- Choose the "Power" tab.
- Adjust the test duration and load.
- Click "Start" to initiate the test. Monitor voltage and temperature.
Preparation Before Testing:
- Close unnecessary programs and windows.
- Connect to a stable power source.
- Monitor computer temperature. Stop the test if overheating occurs.
RAM Test and Configuration:
- Open OCCT and select the "Memory" test.
- Set duration and settings (1 hour recommended).
- Click "Start" to begin the test.
Monitoring Test Results:
- Monitor RAM usage and error margin.
- Note any errors or instability. Issues may indicate RAM problems.
We hope this guide helps you use OCCT to test your computer's performance and stability. Contact us for support.